Ideas For Change Bathroom Floor Tile

Author: admin | Categories: Floor Tile comments
New Bathroom Floor Tile Design

Bathroom floor tile – An easy way to get old tiles off is to heat them until the glue becomes smooth. Once they are gone, however, you still have to spend some time scraping and cleaning the subfloor, as any old glue will cause the bumps they will show through your new floor. A belt sander with a thick sanding band will reduce the time it will take to scrape and make the preparation of the subfloor easier.

Ideas for change bathroom floor tile, close the water valve to the toilet and unscrew the toilet supply line. Unload the toilet to empty the tank, unscrew the screws that hold the floor with a key, take off the bolts and take it out of the room. Scrape the tiles off, starting from the toilet bowl, where the edges of the pieces are accessible. They can easily get out with the scraper, but if not, they heat with a heat gun or blow dryer to soften the glue, and then scrape off.

Scrape off as much of the glue as possible from the subfloor when the tiles have been removed. Work on areas where glue remains with a belt sander equipped with a thick belt. When you have leveled the entire subfloor in this manner, vacuum the floor thoroughly to remove all sanding dust. Make a mark in the center of one of the walls, using a tape measure and a pencil, and use a carpenter’s square to trace a line from that mark down the floor.

Related :  Best Decorate with Maple Hardwood Flooring

Comments are closed.